Revolt Lab RC Power Wheels Part 1

Revolt Lab is making a mini mobile (hobby) rocket platform! In this first update we will show you how to convert your power wheels vehicle into a remote controlled platform.

First things first.

Find a Power Wheels. If you don’t already have one laying around, craigslist and freecycle are great ways to find Power Wheels on the cheap. We got our Cruisin’ Tunes Barbie Jeep for $35!

You will also need a hobby radio unit. I got mine at the local hobby shop for 50 bucks. It has great responsiveness, comes with a servo, and even has a third channel. The best part about these packages is that you can just unplug your receiver from your project and start a whole new project without buying a whole new set!

Lastly you will need two servos. One regular servo for the gas pedal and a rather larger one for steering. The regular servo should come with your radio kit. The larger one is a little pricey, but our second place finish in the instructables microcontroller contest granted us the gift certificate funds to purchase one.

Take apart your car or jeep. Don’t touch any wires yet, but remove seats, steering wheel, battery and anything else you don’t like.

Making it Go

To activate the gas pedal, attach a servo as shown below. Connect the servo to the pedal via a wire threaded though an eye screw. The eye screw will redirect the force of the servo pushing the pedal to the floor. Wood screws work great for securing servos anywhere on the plastic shell of the Power Wheels. Keep the wire in place by clamping it down to the pedal with a wood screw and a washer.

Making it Turn

Take your large servo and position it as shown below. You will need two arms to connect the servo to the steering bar. One will come from the servo extending the servo’s reach.  The second will come sideways from the end of the first bar and fasten to the hole in the steering bar. Any piece of hard plastic or metal will do. I used an old silk screen squeegee for one of my arms. Put rubber washers between each bolt, nut, and arm to reduce direct stress on the plastic or metal.


The standard plastic wheels on these toys do not get very much traction. You can compensate by screwing some old bike tire strips around the circumference of the wheels. The back wheels are the most important because these are the ones connected to the motors.


I found that the original battery position at the front of my barbie jeep made the steering a little slow. To fix this I simply threaded the battery plug to the back of the jeep and placed the battery under where the seats would be. This gives the back tires more traction while allowing the front tires to turn freely.

RC Setup

Now it is time to plug the servos into the radio receiver. Be sure to plug the steering servo into the STR (steering) slot and the pedal servo into the THR (throtle) slot. Always turn on your remote controller before your receiver. With the remote control on, turn on your receiver. Test the pedal and steering servos for alignment. If your steering is always going to the left or right when you are not controlling it, you need to adjust the large gear with the first arm so that it is steering straight when idle. Adjust for pressure on the pedal servo by pulling on the wire and clamping the pedal screw over it.

You are all set to ride! Make any cosmetic modifcations you want and then go bask in the envy of all who cross your path!



Filed under Uncategorized

15 responses to “Revolt Lab RC Power Wheels Part 1

  1. Pingback: Power Wheels Jeep makes an awesome R/C car - Hack a Day

  2. Pingback: Power Wheels Jeep makes an awesome R/C car » Geko Geek

  3. Pingback: Power Wheels Jeep makes an awesome R/C car « Uncategorized « Cool Internet Projects

  4. Pingback: Power Wheels Jeep makes an awesome R/C car | ro-Stire

  5. Pingback: Pink Power wheels turned R/C - BuildLounge » BuildLounge

  6. Adam

    whats the soundtrack to the video?

  7. Black Wolf

    Should see if you can get a hold of the telemetry unit for those radio systems so it can report back signal strength, RX battery voltage, motor temps and speed if you set it up properly.

    Good choice on Spektrum radio gear though!

  8. Yar

    Nice work, simple and elegant.
    Can you show more pix of the steering setup?

  9. Pingback: Power Wheels Jeep makes an awesome R/C car « Vijai's Blog

  10. David W

    Very cool idea and execution.

    If you leave the seat in, you can give a kid a fun ride.

    I’m thinking that for hillier/rougher terrain, it might work to splice in the back of a 2nd PowerWheels, wrap the rear tires with belts, maybe made of old treadmill or shopping checkout conveyor material with knobbies of some kind attached, and make a half-track.

  11. Pingback: RC Power Wheels | HACKOLOG - Amazing Hacks and Mods

  12. ed smith

    new at this…. can you share some info re servo used on this project. looking to buy one for my project…..
    thanks for great pics and video!

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s